Marina Fenders

Marina Fenders are solid Polyurethane Foam cushions designed to be mounted on Marinas, Docks, Walers and Pilings. With the use of matching corners and end caps they can be formed into an aesthetically pleasing individual protective cushion or used in an intermittent or continuous line for peace of mind and protection along the full length and shape of a dock or slip. Due to the clever solid foam construction of our Marina Fenders they can shaped and mitre-cut around any angle without the need for additional/specialised corner pieces. There is of course a 90 degree external corner piece in the portfolio already.

Most marina fender cushions on the market fall into three catagories: 1. Pneumatic and made of PVC; 2. Made from EVA or other types of foam which require cutting into flat shapes; 3. Once again made from cut foams but contained inside a PVC/Canvas sleeve. Unfortunately these do not take generally take into account the flexibility needed for completely protecting a marina or slip or the individuality of the boat owner and their requirements. Marinaquip Marina Fenders are able to be easily fitted to any shape, size and complexity of marina berth or slip, they are puncture proof and provide a considerable degree of cushioning for boat and berth.

Marina Fenders can be used for protecting boats and virtually any part of a marina structure from each other. They can be mounted in horizontal, vertical and slanted positions and can be arranged in any design, length or pattern in an aesthetically pleasing manner with or without the finishing touch of the matching end caps and corners.

Marina Fenders should be fastened to your dock, berth, pontoon, waler or post with the use of suitable stainless steel or galvanised fasteners with loose or inbuilt washers such as tek screws. These should be placed in all of the special recesses. Be careful not to over-tighten the fasteners.

Marina Fenders are made from a special grade of Polyurethane Foam which is moulded (cast) into the unique and aesthetic designs. All shapes, sizes and designs of our Marina Fenders are made in this way.  It will not deflate, or go flat and cannot be punctured.

Marina Fenders are very strong and able to withstand rubbing, pressure and hits from all manner of yachts and launches in the leisure market. N.B. This is not a commercially rated product.

Currently there are two sizes of Marina Fender

1. MF1000 which has matching end caps and 90 degree external corners

• Length 1000mm
• Height 150mm
• Depth 75mm

1. MF500 which has matching end caps

• Length 500mm
• Height 70mm
• Depth 70mm

Marina Fenders require no maintenance other than to clean from time to time.